12.5" 5.56mm, Carbine, 1:7, GOV

In stock
SKU
12.5"_Carbine_GOV_Barrel
As low as $298.00

Financing Available

Details

Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

Stripped Barrel  1.40lbs 
Barrel w/ LPG 1.48lbs 
Barrel w/ FSB  1.71lbs 


All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and highest quality exterior coating. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

NFA Disclaimer

Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.

Specifications

More Information
Caliber 5.56mm NATO
Barrel Length 12.5"
Manuf. Process Cold Hammer Forged
Twist Rate 1:7
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Mil-Spec Heavy Phosphate
Inside Finish Chrome
Gas System Carbine Length
Diameter At Gas Port .750″
Barrel Extension A4
Barrel Profile Government
Weight 1.40lbs
Manufacturer Daniel Defense
Daniel Defense Satisfaction Guarantee
Guaranteed Satisfaction

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products. Be sure to retain your sales slip as proof of purchase date when making a claim.

Customer Reviews
Rating:
100% of 100

2 Item(s)

Show per page
  1. Excellent barrel
    Price
    100%
    Value
    100%
    Quality
    100%
    I have tested 2 hand loads with this barrel: 77 TMK and 69 SMK, this barrel is SUB MOA all day long!! I get very little copper out of this barrel unlike other brands chrome lined barrels. Without a doubt one of the best barrels I own.

    Review by

    Posted on

  2. Barrel life
    Price
    100%
    Value
    100%
    Quality
    100%
    I have a 12.5" CHF DD Barrel with over 12,000 rds going thru it and is still as great as day one. Wished DD would swap and give me a new one and put this in their museum.

    Review by

    Posted on

2 Item(s)

Show per page
Write Your Own Review
You're reviewing:12.5" 5.56mm, Carbine, 1:7, GOV
Your Rating