SoundGuard™ DT Suppressor Adapters
Details
Constructed of stainless steel or titanium (see drop-down menu), Daniel SoundGuard Powered by KGM Suppressor 1.375-24 HUB direct-thread adapters are available in in ½ - 28” and 5/8 - 24” TPI and provide rock-solid mounting and rapid attachment/detachment. They utilize a non-proprietary flat wrench (included) that attaches or removes the adapter to the suppressor tube or an appropriately threaded firearm muzzle in seconds—no additional or special tools necessary! Because no mounting adapters or other mounting hardware is required, these direct-thread adapters allow the suppressors to be conveniently and easily switched from one firearm to another compatible-caliber firearm with an appropriately threaded muzzle. Just remember to ALWAYS CHECK—AND DOUBLE-CHECK—FOR PROPER ALIGNMENT BEFORE FIRING when installing SoundGuard—or any—suppressors to a firearm.
FEATURES
- Provides rock-solid direct-thread mounting and attachment/detachment in seconds with included flat wrench
- Utilizes industry-standard HUB 375-24 UNS, enabling SoundGuard suppressors to be conveniently switched from one firearm to another compatible-caliber firearm with an appropriately threaded muzzle
- No proprietary tools, adapters, or other mounting hardware required
MATERIALS & CONSTRUCTION
- Machined from durable stainless steel or lightweight titanium (SG-30Ti only)
- Made in the U.S.A.
- Backed by Daniel Defense’s 100% Satisfaction Guarantee
½ - 28” ADAPTER SPECIFICATIONS
- Compatible Suppressor: SG-556
- Compatible Calibers: .223 Rem / 5.56mm
- Weight: 2 ounces
- Material Construction: Stainless Steel
- Threads: ½ x 28” TPI
- Mounting Flat Wrench Included
5/8 - 24” ADAPTER SPECIFICATIONS
- Compatible Suppressor: SG-30
- Compatible Calibers: .223 Rem – 300 PRC
- Weight: 2 ounces
- Material Construction: Stainless Steel
- Threads: 5/8 x 24” TPI
- Mounting Flat Wrench Included
5/8 - 24” TITANIUM ADAPTER SPECIFICATIONS
- Compatible Suppressor: SG-30Ti
- Compatible Calibers: .223 Rem – 300 PRC
- Weight: 1.75 ounces
- Material Construction: Titanium
- Threads: 5/8 x 24” TPI
- Mounting Flat Wrench Included
Specifications
| Caliber | SG-556 = .223/5.56mm, SG-30 = .223 Rem > 300 PRC, SG-30Ti = .223 Rem > 300 PRC |
|---|
Guaranteed Satisfaction
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.