Rail Systems

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. 7.62 Lite Rail™ 7.0, Carbine

    7.62 Lite Rail™ 7.0, Carbine

    $249.00

    The 7.62 Lite Rail™ features our patented “Bolt-Up System™ ” allowing simplified alignment to the host weapon upper receiver and providing a continuous, uninterrupted upper rail platform for weapons with flat top upper receivers.  The battle proven “Bolt-Up System” is also used on the Daniel Defense RIS II (selected by SOCOM for the SOPMOD II program).  Every component of the 7.62 Lite Rail has been precisely assessed, thoroughly shot & tested, improved upon, and manufactured tough enough to become the new benchmark in 7.62 rail systems.  Using specifically engineered barrel nuts, the Daniel Defense 7.62 Lite Rail is compatible with the Armalite AR10, Rock River Arms LAR-8, and DPMS LR-308 rifles.

    Learn More
  2. AR15 Lite Rail III™ 12.0 (Rifle)

    AR15 Lite Rail III™ 12.0 (Rifle)

    $395.00

    The AR15 Lite Rail III™ is the third generation of Lite Rail from Daniel Defense.  The improved design enhances the rail’s structural integrity, improves functionality, ergonomics,  aesthetics and ease of installation to the weapon system without compromising its best-known attributes, one of which being the lightest rail system on the market.  Enhanced features include a machined one-piece design, replacing the previous two-piece welded design of the 1st generation Lite Rail, and uses our patented Bolt-Up System. The AR15 Lite Rail III™ requires only 4 bolts instead of 6 and has tabs that aid in alignment to the upper receiver during installation.  Front and Rear Sling Swivel Attachment Points are integrated into both the left and right side rails and are designed to limit the swivel’s rotation preventing twists and tangles in slings. 

    The AR15 Lite Rail III™ 12.0 is an extended rail system designed to be used in conjunction with a low profile gas block on either a carbine or mid-length gas system. This rail system gives the end user more “real estate” to mount various accessories available to the AR15 platform. When mounting a front sight to the top rail, it allows the shooter to have an extended sight radius enabling more precise shot placement.

    Learn More
  3. AR15 Lite Rail III™ 15.0 (Rifle)

    AR15 Lite Rail III™ 15.0 (Rifle)

    $395.00

    The AR15 Lite Rail III™ is the third generation of Lite Rail from Daniel Defense.  The improved design enhances the rail’s structural integrity, improves functionality, ergonomics,  aesthetics and ease of installation to the weapon system without compromising its best-known attributes, one of which being the lightest rail system on the market.  Enhanced features include a machined one-piece design, replacing the previous two-piece welded design of the 1st generation Lite Rail, and uses our patented Bolt-Up System. The AR15 Lite Rail III™ requires only 4 bolts instead of 6 and has tabs that aid in alignment to the upper receiver during installation.  Front and Rear Sling Swivel Attachment Points are integrated into both the left and right side rails and are designed to limit the swivel’s rotation preventing twists and tangles in slings. 

    The AR15 Lite Rail III 15.0 is an extended free float rail system designed to be used in conjunction with a low profile gas block on a carbine, mid-length, or rifle-length gas systems. This rail system gives the end user even more “real estate” to mount various accessories available to the AR15 platform. When mounting a front sight to the top rail, it allows the shooter to have an extended sight radius enabling more precise shot placement.

    Learn More
  4. AR15 Lite Rail III™ 7.0 (Carbine)

    AR15 Lite Rail III™ 7.0 (Carbine)

    $335.00

    The AR15 Lite Rail III™ is the third generation of Lite Rail from Daniel Defense.  The improved design enhances the rail’s structural integrity, improves functionality, ergonomics,  aesthetics and ease of installation to the weapon system without compromising its best-known attributes, one of which being the lightest rail system on the market.  Enhanced features include a machined one-piece design, replacing the previous two-piece welded design of the 1st generation Lite Rail, and uses our patented Bolt-Up System. The AR15 Lite Rail III™ requires only 4 bolts instead of 6 and has tabs that aid in alignment to the upper receiver during installation.  Front and Rear Sling Swivel Attachment Points are integrated into both the left and right side rails and are designed to limit the swivel’s rotation preventing twists and tangles in slings. 

    AR15 Lite Rail III™ 7.0 free float rail system was designed to work with carbine-length AR15 gas systems and its exceptionally light weight makes it perfect for short rifles where size and weight are crucial performance attributes.

    Learn More
  5. AR15 Lite Rail III™ 9.0 (Mid-length)

    AR15 Lite Rail III™ 9.0 (Mid-length)

    $365.00

    The AR15 Lite Rail III™ is the third generation of Lite Rail from Daniel Defense.  The improved design enhances the rail’s structural integrity, improves functionality, ergonomics,  aesthetics and ease of installation to the weapon system without compromising its best-known attributes, one of which being the lightest rail system on the market.  Enhanced features include a machined one-piece design, replacing the previous two-piece welded design of the 1st generation Lite Rail, and uses our patented Bolt-Up System. The AR15 Lite Rail III™ requires only 4 bolts instead of 6 and has tabs that aid in alignment to the upper receiver during installation.  Front and Rear Sling Swivel Attachment Points are integrated into both the left and right side rails and are designed to limit the swivel’s rotation preventing twists and tangles in slings. 

    The AR15 Lite Rail III™ 9.0 free float rail system was designed to work with mid-length AR15 gas systems and its exceptionally light weight makes it perfect for short rifles where size and weight are crucial performance attributes.

    Learn More
  6. AR15 Lite Rail™ 9.5 FSP, Carbine

    AR15 Lite Rail™ 9.5 FSP, Carbine

    $395.00

    The Daniel Defense AR15 Lite Rail™ utilizes the patented Bolt-Up System™ which allows the upper receiver to have a continuous uninterrupted upper rail platform. The Daniel Defense 9.5 FSP Free Float Rail System features a cut in the front of the top rail to accommodate the front sight post and gas block of a carbine-length AR15 gas system, while at the same time, providing much needed additional rail space along the sides and bottom rails. More rail space means enhanced capability for modern rifle accessories.

    Every rail is available with either ladders or panels which are made from santoprene, which can handle heat up to 350.

    Learn More
  7. EZ CAR® RAIL 9.0, MID-LENGTH

    EZ CAR® RAIL 9.0, MID-LENGTH

    $149.00

    The EZ CAR® Rail is the perfect drop in replacement for your plastic hand guards. The EZ CAR Rail 9.0 from Daniel Defense has been engineered to offer a rock solid mounting platform for all your AR accessories. The EZ CAR Rail easily replaces factory installed plastic hand guards, and it offers a Mil-Spec quad rail that installs in seconds. As simple to install as a traditional hand guard, the EZ CAR Rail mounts to a standard delta ring and handguard cap (round) of a mid-length length gas system with no modifications to the host weapon.

    Learn More
  8. M4A1 FSP Rail Interface System (RIS) II

    M4A1 FSP Rail Interface System (RIS) II

    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II M4A1 FSP feature a cut-out in the top rail to accommodate a standard front sight base on a carbine-length gas system.

    NSN # 1005-01-566-5280

    Learn More
  9. M4A1 Rail Interface System (RIS) II

    M4A1 Rail Interface System (RIS) II

    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block.
    The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operator to quickly, and without special tools, mount M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  10. MK18 Rail Interface System II, RIS II

    MK18 Rail Interface System II, RIS II

    $445.00
    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense MK18 RIS II is designed to work specifically on the MK18 CQBR! The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need.

    Learn More

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction