The DDM4 V7 PRO AR15 style firearm is for competitors looking to dominate podiums in today's popular multi-gun matches. Built around our 18 inch Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the most difficult multi-gun stages.
The V7 PRO comes standard with the MFR 15.0 M-LOK rail, which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. An uninterrupted Picatinny rail on top and M-LOK attachment points ensure plenty of real estate for optics and accessories and allow for the maximum sight radius for accurate shooting with rail mounted iron sights. Its muzzle device, the Muzzle Climb Mitigator, redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb. A Geissele Automatics Super Dynamic 3 Gun Trigger delivers rapid hits on target with its light, short pull and quick reset. Combined with the softened recoil impulse of a rifle-length gas system, this allows for shorter split times, more precise follow-up shots, and reduced fatigue. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- TRIGGER: Geissele Automatics Super Dynamic 3-Gun Trigger
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 18" S2W Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
|Muzzle Thread||1 ⁄ 2 × 28 TPI (Threads Per Inch)|
|Barrel Profile||S2W® [Strength-to-Weight]|
|Product Weight||7.40 lbs|
|Length||34 3/4" – 37 7/8”|
|Case||Daniel Defense Full-Latch Impact Plastic Case|
Muzzle Climb Mitigator
Reduced recoil and muzzle rise, keeping you on target for quicker follow-up shots
Cold-Hammer Forged Barrel
Intense hydraulic pressure process that forms the most accurate and longest-lasting barrels attainable
Flared Magazine Well
Widened and beveled magwell funnels magazines into place for the fastest, most secure reloads possible
Ambi Safety Selector
For right or left-handed shooters
Free Float Rail System
Proprietary 4- or 6-bolt attachment to the upper receiver allows the rail system to free float the barrel, which will ensure barrel harmonics are not affected during operation
Features a nonslip cheek weld, interchangeable butt pads, and an integral QD point
Integrated quick-disconnect points for the attachment of slings
Features M-LOK attachment technology
Ergonomic wrist angle, integral trigger guard and nonslip grip for comfort and control in all conditions
Excellent ChoiceThis rifle is built with ergonomics and functionality in mind. It feels like it was custom made for me. The attention to detail in the design and craftsmanship is nothing short of amazing. Do yourself a favor and upgrade to Daniel Defense now.
DDM4V7 Pro - Hands down the best gun I ownI would put this gun up against any other! So much fun to shoot and the trigger is so soft and clean I am killing targets at 100 and 150 yards. SO SWEET. You owe yourself the best and in my opinion this is it!!!!
AbdulhalimJust love it
Fast, flat, accurate shooter, but heavy and long.My first Daniel Defense and my second AR 556 platform. Amazed at the accuracy, shot very tight grouping at 100 yards with 1-8 scope. The longer heavier barrel with the rifle length gas block provide with very low recoil impulse. The low recoil combined with the factory upgraded Geissele trigger made for fast accurate follow up shots. I changed out the stock rubber buffer with the thicker included recoil pad and found little to no shoulder discomfort after 500 plus rounds. Muzzle brake works great it provided little to no muzzle rise on follow up shots but is very loud. My use is for target shooting, maybe tournaments, muzzle brake will make close quarters or home defense a little loud. Great rifle!, i hope to purchase another sometime soon.
I’m Head Over HealsWhen I picked my rifle up front the dealer, he brought the box up and looked at me with extreme envy before saying “There’s one sexy piece of craftsmanship in here”. Oh boy was that an understatement...
Great rifle, is as advertisedPurchased the V7 Pro over the standard V7 because I liked the 18” S2W barrel. It feels like high quality in the hands. The muzzle climb mitigator is not a gimick, there’s virtually no muzzle rise when firing, just remember to drop your muffs, its LOUD. The factory stock and grip feel great to me. Unfortunately I purchased a Geissele SSA 2 stage trigger before the rifle shipped because I assumed the original Geissele 3 gun trigger that comes in the gun would bump fire when target shooting, like the Geissele web site warns is a possibility. Turns out I absolutely love the 3 gun trigger and have no bump fires on the bench because i hold the trigger on the follow through like you’re supposed to do on the bench. Guess I’ll replace the crappy mil-spec trigger in one of my other rifles. And this rifle is accurate. Very often match bullet holes at a 25 yard paper target with M193 55 gr and consistently hit an 8 inch steel plate at 200 yards using a non-magnification 2moa red dot. Very happy with this purchase. No malfunctions after about 500 rounds so far.
Best rifle I have ever owned!!!If you have any question of quality and reliability this has it all have owes this rifle for 2 years now thousands of rounds not a single malfunction ever!!! What other manufacture can top that!!
Sell all your low grade weapons and get this.I purchased a DDM4V7Pro several years ago. It is topped with a 6.5x-25x scope. Shot after shot it keeps going. I am not a great rifle shooter but I can put 20 rounds into a 300m target in a group about the size of a tennis ball. The trigger makes it all worth it. Crisp, clean pull. Recoil does not move the scope off the 300m target so you can see the bullet explode on the steel. Thanks DD for a fantastic weapon!
My FavoriteHigh quality and well built. My favorite range rifle, shoots thousands of rounds with no issues. If the price was right I would buy another. 1 of 3 of my Daniel Defense and I love them all. Also shoots great with the Dwave supressor. Great job DD Family!!!!
If you are only going to have one AR-15Do it, NOW! I ordered mine factory direct with an email alert for when the rifle became available. I really wanted to have it before the election and the local gun stores are bare. I had it shipped to a DD preferred dealer with ZERO FFL fee. I had this rifle in my hands 4 days after the date of manufacture. I love this rifle. Everything about it is solid, well made, and crisp. It's so good looking. I carried an M16 for three tours in Iraq and there is no comparison to the craftsmanship and quality of this rifle. Proudly made in my great state of Georgia! Thank you Daniel Defense.