Details
The DDM4 V7 AR15 style firearm features M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16 inch barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
Specifications
| Mounting System | M-LOK |
|---|---|
| Caliber | 5.56mm NATO |
| Muzzle Thread | 1 ⁄ 2 × 28 TPI (Threads Per Inch) |
| Gas System | Mid-length |
| Barrel Length | 16" |
| Barrel Profile | Government |
| Product Weight | 6.2 lbs |
| Length | 32 1/4" – 35 7/8” |
| Magazine | Magpul PMAG 10-Round |
| Case | Daniel Defense Full-Latch Impact Plastic Case |
| Manufacturer | Daniel Defense |
Features
Muzzle Device
Improved design reduces flash signature compared to the traditional A2 birdcage for AR15 style firearms
Cold-Hammer Forged Barrel
Intense hydraulic pressure process that forms the most accurate and longest-lasting barrels attainable
Flared Magazine Well
Widened and beveled magwell funnels magazines into place for the fastest, most secure reloads possible
Ambi Safety Selector
For right or left-handed shooters
Free Float Rail System
Proprietary 4- or 6-bolt attachment to the upper receiver allows the rail system to free float the barrel, which will ensure barrel harmonics are not affected during operation
Buttstock
Features a nonslip cheek weld, interchangeable butt pads, and an integral QD point
QD Points
Integrated quick-disconnect points for the attachment of slings
M-Lok
Features M-LOK attachment technology
Pistol Grip
Ergonomic wrist angle, integral trigger guard and nonslip grip for comfort and control in all conditions
Guaranteed Satisfaction
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.