DD5® SBR (7.62x51mm)

Out of stock
SKU
02-088-06071-047-c
Starting at: $2,731.00

Details

The DD5 SBR offers all the benefits of the full size rifles, but in a smaller package.  This highly accurate and durable rifle is built around a 12.5” barrel, mid-length gas system, an adjustable gas block that allows for a consistent feel whether shooting suppressed or unsuppressed, and features the Daniel Defense Linear Compensator.  The perfected bolt carrier group reduces overall recoil impulse and is easy to maintain and operate in all conditions. Designed around a Cold Hammer Forged barrel with an innovative 4-Bolt Connection System, this design dramatically increases the connection surface area between the barrel and upper receiver for increased rigidity/stability to wring out accuracy traditionally only found in high-end bolt action rifles. The DD5 SBR features fully ambi controls and Daniel Defense enhanced furniture.

NFA DISCLAIMER

This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer's responsibility to make sure they comply with all NFA rules and applicable laws.

  • User-adjustable gas block for reliable suppressed shooting
  • Superfinished and DLC-coated bolt carrier group makes it easy to clean and operate in all conditions
  • Bolt carrier is equipped with a buffer for optimized cycling and improved recoil impulse
  • Bolt is designed with enhanced extractor geometry and dual ejectors for reliable cycling
  • 12.5" Cold Hammer Forged proprietary steel chrome-lined barrel for a lifetime of accuracy and durability
  • Innovative 4-Bolt Connection System to ensure greater accuracy
  • GRIP-N-RIP independently ambi charging handle with anti-gas features for a better shooting experience

Materials & Construction

  • LOWER RECEIVER: Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: DD Proprietary Steel, Cold Hammer Forged, 1:10” Twist, 12.5″ S2W Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: User-Adjustable Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Linear Compensator, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • TRIGGER: Daniel Defense Mil-Spec
  • HANDGUARD: Daniel Defense DD5 Rail 10.5, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • HANDSTOP:  Daniel Defense M-LOK Handstop, Anodized Aluminum
  • MAGAZINES: Accepts All SR-25 Magazines
  • Made in the USA!

Specifications

More Information
Mounting SystemM-LOK
Caliber7.62 x 51mm / .308 Winchester
Muzzle Thread5 ⁄ 8 × 24 TPI (Threads Per Inch)
Gas SystemMid-length
Barrel Length12.5"
Barrel ProfileS2W® (Daniel Defense's proprietary Heavy Barrel)
Product Weight8.2 lbs
Length30.38" - 33.63" (w/ muzzle device)
MagazineMagpul PMAG 20-Round
CaseDaniel Defense Full-Latch Impact Plastic Case
ManufacturerDaniel Defense

Features

DD5® SBR (7.62x51mm)
Linear Compensator
1

Linear Compensator

Directs muzzle blast forward, away from the shooter

Cold-Hammer Forged Barrel
2

Cold-Hammer Forged Barrel

Intense hydraulic pressure process that forms the most accurate and longest-lasting barrels attainable

Flared Magazine Well
3

Flared Magazine Well

Widened and beveled magwell funnels magazines into place for the fastest, most secure reloads possible

Ambi Safety Selector
4

Ambi Safety Selector

For right or left-handed shooters

Free Float Rail System
5

Free Float Rail System

Proprietary 4- or 6-bolt attachment to the upper receiver allows the rail system to free float the barrel, which will ensure barrel harmonics are not affected during operation

Buttstock
6

Buttstock

Features a nonslip cheek weld, interchangeable butt pads, and an integral QD point

QD Points
7

QD Points

Integrated quick-disconnect points for the attachment of slings

M-Lok
8

M-Lok

Features M-LOK attachment technology

Pistol Grip
9

Pistol Grip

Ergonomic wrist angle, integral trigger guard and nonslip grip for comfort and control in all conditions

Adjustable Gas Block
10

Adjustable Gas Block

User-adjustable gas block for reliable suppressed shooting

4-Bolt Connection System
11

4-Bolt Connection System

4-Bolt Connection System, that attaches the barrel to the receiver without a barrel nut, ensures greater accuracy

GRIP-N-RIP Charging Handle
12

GRIP-N-RIP Charging Handle

Independently ambi charging handle with anti-gas features for a better shooting experience

DD Hand Stop
13

DD Hand Stop

Daniel Defense M-LOK Handstop aids the shooter with indexing the support hand, with placement to the rear of the muzzle

Daniel Defense Satisfaction Guarantee
Guaranteed Satisfaction

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.

Customer Reviews
Rating:
100% of 100

1 Item

Show per page
  1. 308SBR AKA little thumper…
    Overall
    100%
    An amazingly built very thought out weapon. Accurate fun to shoot.

    Review by

    Posted on

1 Item

Show per page
Write Your Own Review
You're reviewing:DD5® SBR (7.62x51mm)
Your Rating

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.