• Home
  • Firearms
    • 7.62 x 51mm
    • Pistol Length Gas System
    • Carbine Length
    • Mid Length
    • Rifle Length
    • Ambush Hunting Rifles
  • Uppers
    • Pistol Length URG
    • Carbine Length URG
    • Mid Length URG
    • Rifle Length
  • Rails
    • DDM4 Rail
    • Omega Rail
    • Rail Interface System (RIS) II
    • SLiM Rail
    • Rail Tools & Components
  • CHF Barrels
    • 10.3 Inch CHF Barrels
    • 11.5 Inch CHF Barrels
    • 12.5 Inch CHF Barrels
    • 14.5 Inch CHF Barrels
    • 16 Inch CHF Barrels
    • 18 Inch CHF Barrels
  • Ammunition
  • Parts & Accessories
    • DD Magazines
    • Gas Blocks
    • Lower Parts
    • Muzzle Devices
    • Rail Ladders
    • Small Parts
    • Sights
    • Tools
    • Upper Parts
    • Vertical Grips
  • Mounts
    • Sling
    • Optics
    • Flashlight
    • Bipod
  • Gear
    • Nine Line Apparel
    • Oakley
    • Knife
    • Headwear
    • Water Bottles
    • Rifle Case
  • Furniture
    • Buttstocks
    • Pistol Grips
    • Vertical Grips

Search results for 'ca'

Refine Results:
  1. 10.3" 300BLK, PISTOL, 1:8", S2W®
    $289.00

    The Daniel Defense 10.3” 300 Blackout S2W® barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel), a 1:8" twist rate, and a pistol length gas system.

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible. Learn More

  2. Daniel Defense Carbine H-Buffer
    $30.00

    The Daniel Defense Carbine H-Buffer Assembly for use in M4-type receiver extension tubes.

    Learn More
  3. Daniel Defense Carbine Buffer Spring
    $14.00

    The Daniel Defense Carbine Buffer Spring for use in M4-type receiver extension tubes.

    Learn More
  4. Daniel Defense Mil-Spec Receiver Extension, 6-Position
    $36.00

    The Daniel Defense Mil-Spec Receiver Extension (Buffer) Tube allows for 6-positions of adjustability with a Mil-Spec collapsible buttstock.

    Learn More
  5. SLiM Rail® 12.0 (Rifle)
    $279.00

    The SLiM Rail from Daniel Defense utilizes the KeyMod accessory attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The SLiM Rail features the battle-proven “Bolt-Up System” which provides modern flat-top upper receivers with a free-floating, continuous, uninterrupted upper rail platform and allows for simplified alignment to the host weapon upper receiver.   Ambidextrous sling swivel attachment points are integrated into both the left and right side rails at 1 and 11 o’clock. The SLiM Rail can be used with a low-profile gas block on pistol, carbine, or mid-length gas systems.

    Learn More
  6. SLiM Rail® 15.0 (Rifle Extended)
    $299.00

    The SLiM Rail from Daniel Defense utilizes the KeyMod accessory attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The SLiM Rail features the battle-proven “Bolt-Up System” which provides modern flat-top upper receivers with a free-floating, continuous, uninterrupted upper rail platform and allows for simplified alignment to the host weapon upper receiver.   The long, 15” rail gives operators the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, preventing over travel when transitioning between multiple targets.  When mounting a front sight to the top rail, it allows the shooter to have an extended sight radius enabling more precise shot placement.  Ambidextrous sling swivel attachment points are integrated into both the left and right side rails at 1 and 11 o’clock. The SLiM Rail can be used with a low-profile gas block on pistol, carbine, mid, or rifle-length gas systems.

    Learn More
  7. Daniel Defense V11™ (Daniel Defense Tornado®)
    $1,759.00

    The Daniel Defense M4 Carbine V11, based on the popular V9 series, was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail™ (Slim Lightweight Modular).  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail™ 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4V11 is equipped with a free-floating, Cold Hammer Forged, 16” Government profile barrel and the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.  This rifle is finished in Daniel Defense Tornado™ Cerakote™.

    Learn More
  8. Daniel Defense V11™ (Mil Spec +®)
    $1,759.00

    The Daniel Defense M4 Carbine V11, based on the popular V9 series, was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail.  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4V11 is equipped with a free-floating, Cold Hammer Forged, 16” Government profile barrel and the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.  This rifle is finished in Mil Spec + Cerakote.

    Learn More
  9. Daniel Defense V11™ LW
    $1,599.00

    The Daniel Defense M4 Carbine V11 Lightweight, based on the popular V9 series, was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail™ (Slim Lightweight Modular).  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4V11 LW is equipped with a free-floating, Cold Hammer Forged, 16” Lightweight profile barrel, making it almost 5 ounces lighter than the standard V11. This rifle also includes the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.

    Learn More
  10. Daniel Defense V11™
    $1,599.00

    The Daniel Defense M4 Carbine V11, based on the popular V9 series, was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail™ (Slim Lightweight Modular).  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail™ 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4V11 is equipped with a free-floating, Cold Hammer Forged, 16” Government profile barrel and the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.

    Learn More
  11. Mid-Length Gas Tube
    $16.00

    Daniel Defense Mid-Length Gas Tube Assembly.

    Learn More
  12. Daniel Defense Bolt Assembly, 6.8 SPC
    $69.00

    The Daniel Defense 6.8mm SPC (6.8 x 43mm) Bolt Assembly.

    Learn More
  13. Daniel Defense Bolt Assembly, 5.56 NATO / 300 Blackout
    $69.00

    The Daniel Defense 5.56 NATO (5.56x45mm & .223 Remington) / 300 Blackout (7.6x35mm) Bolt Assembly.

    Learn More
  14. Rear Receiver QD Swivel Attachment Point
    $41.00

    This evolution of the Burnsed Loop™ provides for ambidextrous attachment of the popular push button sling swivel. This aluminum constructed swivel attachment mounts rear of the receiver on carbine AR15. It provides a near receiver quick detach sling loop for attaching a tactical sling.

    Learn More
  15. Daniel Defense MK18 Pistol
    $1,699.00

    The Daniel Defense MK18 Pistol is a variation of the MK18 SBR which has been extremely popular within the Law Enforcement and Special Operations communities. A newly designed Pistol Receiver Extension classifies it as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units). This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol by Daniel Defense is unmatched in size, weight, and performance. The MK18 Pistol is available with a Black or FDE Type III Hard Coat Anodized Rail System.

    Learn More
  16. Daniel Defense Barrel Nut - Bolt-Up System
    $23.00

    The Daniel Defense Bolt-Up System Barrel Nut is designed to work with the Bolt-Up Plates used in mounting the RIS II, DDM4 Rail™, AR15 Lite Rail™, AR15 Lite Rail™ II, AR15 Lite Rail™ III, and SLiM Rail™.  They are precision machined from 4140 steel and have a Mil-Spec Heavy Phosphate finish.  It is designed to be torqued down or removed with the Bolt-Up System Barrel Nut Wrench (Sold Separately).  This barrel nut will work on standard AR-15, M-4, and M-16 pattern upper receivers and barrels.

    Learn More
  17. Daniel Defense Barrel Nut - Modular Float Rail
    $27.00

    The Daniel Defense Modular Float Rail Barrel Nut is designed to interface with the Modular Float Rail’s mounting collar.  This barrel nut is precision machined of 4140 steel and Salt Bath Nitride Treated.  It is designed to be torqued down or removed with Omega X/Modular Float Rail 2-prong Barrel Nut Wrench (Sold Separately).  This barrel nut will only fit standard AR-15, M-4, and M-16 pattern upper receivers and barrels.

    Learn More
  18. Micro Mount (Rock & Lock®)
    $85.00

    The Daniel Defense Micro Mount is designed to securely mount a variety of popular optics to your flat-top upper receiver including Aimpoint’s Micro R-1, H-1, T-1, Vortex’s Sparc I & II, Primary Arms’ Micro Dot & Advanced Micro Dot, Holosun Technologies HS403, or any other optic utilizing the same type of mounting interface.  Offering Absolute or a Lower 1⁄3rd Co-Witness with your back-up iron sights, this mount is ideal for shooters who are looking for one of the lightest and strongest mounts available to secure their optics.

    Its lightweight, essentials only design offers a snag-free, low-profile, reversible mounting option for shooters that do not require or desire a quick attach/detach mount. The mount features a recoil lug that minimizes sheer forces on the factory mounting screws. The Micro Mount features our Rock & Lock Attachment System and secures to any MIL-STD-1913 Picatinny Rail with two slotted machine screws. These fasteners thread into stainless steel self-locking threaded inserts that resist vibration and loosening.

    Machined from 6061-T6 aircraft grade aluminum and Military Specification Hard Coat Anodized, our Micro Mount is both lightweight and durable. Learn More

  19. Daniel Defense MK12 (Daniel Defense Tornado®)
    $2,159.00

    The evolution of the SPR comes home to Daniel Defense in the MK12.  Born of necessity, raised in the Army’s Marksmanship Unit and refined to Daniel Defense Mil-Spec+ standards, it is now available.

    The MK12 is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible.  These barrels, some of the most accurate and durable barrels available, are bead blasted and chemically passivated to resist corrosion.  The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM.  The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated.  The rifle is fed with a M16 profile bolt carrier group and uses a Vltor Mod 4 charging handle for ease of operation.  The upper receiver is equipped with a free floating DDM4 Rail 12.0™ allowing for your choice of optics and accessories and is finished off with a Daniel Defense Improved Flash Suppressor.

    The MK12 was designed from the ground up to be a precision rifle, therefore it required certain refinements.  We equipped it with the Geissele SSA® 2-Stage Trigger to give the marksman an advantage delivering precise fire to the target.  This precision rifle comes finished with Daniel Defense Tornado™ Cerakote™ and is furnished with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip. Learn More

  20. Daniel Defense V11 LW Upper Receiver Group
    $989.00

    The Daniel Defense M4 Carbine V11 Lightweight Upper Receiver Group was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail™ (Slim Lightweight Modular).  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail™ 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4v11 LW URG is equipped with a free-floating, Cold Hammer Forged, 16” Lightweight profile barrel, making it almost 5 ounces lighter than the standard V11. Daniel Defense upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  21. Daniel Defense V11 Upper Receiver Group
    $989.00

    The Daniel Defense M4 Carbine V11 Upper Receiver Group was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM Rail™ (Slim Lightweight Modular).  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The new SLiM Rail™ 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  The long, 15” rail gives operators the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The DDM4v11 URG is equipped with a free-floating, Cold Hammer Forged, 16” Government profile barrel.  Daniel Defense upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  22. Modular Float Rail Foregrip
    $40.00

    The Modular Float Rail Foregrip is standard equipment on all Ambush Firearms hunting rifles, and can be added to any Modular Float Rail (MFR) giving users a more traditional forend feel.  Made from Glass Infused Polymers, this grip securely attaches anywhere along the MFR rail system using two L-Nuts.

    Learn More
  23. Daniel Defense 300™ Pistol
    $1,699.00

    The Daniel Defense M4, 300 Pistol is ideal for close quarters and home defense.  This new option from Daniel Defense comes complete with a 10.3” Cold Hammer Forged S2W® barrel, pistol-length gas system, pinned low profile gas block, and DDM4 Rail™ 9.0. 

    300BLK (7.62X35)

    The 300 AAC BLACKOUT is a .30 caliber cartridges developed for use in AR15-style firearms.  Unlike its wildcat predecessors, the 300 BLK is a SAAMI-standard cartridge.  It provides 7.62x39mm or better ballistics from the AR platform with only a barrel change.  It uses standard 5.56 bolts and magazines.  Ammunition is available in both subsonic and supersonic loadings.

    Learn More
  24. Daniel Defense Tornado
    $29.95

    Updated in 2014, the improved vertical grip now includes soft touch rubber overmolding for enhanced grip, wet or dry.  Inside the grip is a Dual O-Ring, water tight storage compartment capable of storing small parts.  This vert grip is extremely lightweight and utilizes a simple yet durable mounting method for 1913 picatinny rail systems.

    Learn More
  25. Mil Spec+
    $29.95

    Updated in 2014, the improved vertical grip now includes soft touch rubber overmolding for enhanced grip, wet or dry.  Inside the grip is a Dual O-Ring, water tight storage compartment capable of storing small parts.  This vert grip is extremely lightweight and utilizes a simple yet durable mounting method for 1913 picatinny rail systems. 

    Learn More
  26. Daniel Defense V9 Upper Receiver Group
    $1,079.00

    The new Daniel Defense DDM4v9 Upper Receiver Group is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  The long, 15” DDM4 quad rail over a 16” cold hammer forged Government profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.

    The V9 URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  27. Daniel Defense V3 Upper Receiver Group
    $1,199.00

    The Daniel Defense M4 Carbine, V3 Upper Receiver Group is built with a Cold Hammer Forged 16” Government profile barrel with a Mid-length gas system.  It comes installed with our proprietary front sight base which is precision CNC machined from a solid billet of 4140 steel.  This FSB features a serrated curved design to reduce glare and is salt bath nitride treated minimizing corrosion and wear.  Fixed front sights are often regarded to be the most resilient sights and having them at Mid-length offers a longer sight radius for greater aiming precision. It also allows for a longer rail, the DDM4 Rail™ 9.0 for attaching accessories.  QD Swivels attachment points are integrated in to the front and back on both sides of the rail for fully ambidextrous sling attachment.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  28. Daniel Defense V1 Upper Receiver Group
    $1,199.00

    The DDM4v1 Upper Receiver Group is built with a Cold Hammer Forged 16” M4 Profile barrel with a Carbine-Length gas system.  It comes installed with our proprietary front sight block which is precision CNC machined from a solid billet of 4140 steel.  This FSB features a serrated curved design to reduce glare and is salt bath nitride treated minimizing corrosion and wear.  Fixed front sights are often regarded to be the most resilient sights and with the DDM4 Rail 12.0™ FSP the operator can still mount a weapon light or aiming device forward of the front sight for optimal ergonomics and a clear line of sight.  QD Swivels attachment points are integrated in to the front and back on both sides of the rail for fully ambidextrous sling attachment.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  29. Daniel Defense V1 LW Upper Receiver Group
    $1,199.00

    The Daniel Defense M4, V1 Lightweight is built with a Cold Hammer Forged 16” Lightweight Profile barrel making it approximately 5 ounces lighter than the original v1.  It comes installed with our proprietary front sight base which is precision CNC machined from a solid billet of 4140 steel.  This FSB features a serrated curved design to minimize glare and is salt bath nitride treated minimizing corrosion and wear.  The DDM4 Rail 12.0™ FSP allows the operator to mount a weapon light or aiming device forward of the front sight for optimal ergonomics and a clear line of sight.  QD attachment points are integrated in to the front and back on both sides of the rail for fully ambidextrous sling attachment.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  30. Daniel Defense V5 LW Upper Receiver Group
    $1,079.00

    The Daniel Defense M4, V5 Lightweight Upper Receiver Group is built with a Cold Hammer Forged 16” Lightweight profile barrel making it approximately five ounces lighter than the original V5.  It carries the DDM4 Rail™ 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories that fit their shooting needs.  QD Swivels attachment points are integrated into the front and back on both sides of the rail for fully ambidextrous sling attachment.  The DDM4v5 LW URG is equipped with a single pinned low profile gas block at mid-length that is drilled, taper reamed, and press fit into place to securely attach to the barrel assembly.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  31. Daniel Defense V5 Upper Receiver Group
    $1,079.00

    The Daniel Defense M4, V5 Upper Receiver Group is built with a Cold Hammer Forged 16” Government profile barrel with a mid-length gas system.  It is built with the DDM4 Rail™ 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories that fit their shooting needs.  QD Swivels attachment points are integrated in to the front and back on both sides of the rail for fully ambidextrous sling attachment.  The DDM4v5 URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach to the barrel assembly.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  32. Daniel Defense V9™ LW (Daniel Defense Tornado®)
    $1,849.00

    The new Daniel Defense DDM4V9 Lightweight is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  The long, 15” DDM4 quad rail over a 16” cold hammer forged Lightweight profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over-travel when transitioning between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The V9 Lightweight is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip and is finished with Daniel Defense Tornado™ Cerakote™.

    Learn More
  33. Daniel Defense V5™ (Daniel Defense Tornado®)
    $1,849.00

    The Daniel Defense M4, V5 uses a Cold Hammer Forged 16” Government profile barrel with a mid-length gas system.  It carries the DDM4 Rail 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories that fit their shooting needs.  QD Swivel attachment points are integrated into the front and rear on both sides of the rail for fully ambidextrous sling attachment.  The DDM4V5 is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach to the barrel assembly.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip and is finished with Daniel Defense Tornado Cerakote.

    Learn More
  34. M4A1 FSP Rail Interface System II, RIS II (FDE)
    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself.

    The Daniel Defense RIS II M4A1 FSP feature a cut out in the top rail to accomdate a standard front sight base on a carbine length gas system.

    The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operator to quickly, and without special tools, mount M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  35. Daniel Defense V9 LW Upper Receiver Group
    $1,079.00

    The new Daniel Defense DDM4v9 Lightweight Upper Receiver Group is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  The long, 15” DDM4 quad rail over a 16” cold hammer forged Lightweight profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.

    The V9 Lightweight URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  36. Daniel Defense M4A1 Upper Receiver Group
    $1,219.00

    The Daniel Defense M4A1 Upper Receiver Group features the M4A1 Rail Interface System (RIS II), which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  This two-piece, free-floating rail system allows the mounting of devices like a M203 grenade launcher without influencing the barrels harmonics, eliminating problems like wandering point of impact that plagued other mounting designs.  The two-piece design also allows for partial disassembly of the rail to aid in cleaning around barrel without completely removing the entire rail system.  The weight of anything attached to the RISII rail system is fully supported by a sturdy bolt-up system, using 6 grade 8 bolts, leaving the barrel completely free floating for best possible accuracy and dependability.  The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Improved Flash Suppressor to meet the NFA required 16” length. Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  37. Buttstock, Pistol Grip, & Vertical Foregrip Combo - Black
    $114.95

    BUTTSTOCK

    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.

    Learn More
  38. Black
    $29.95

    Updated in 2014, the improved vertical grip now includes soft touch rubber overmolding for enhanced grip, wet or dry.  Inside the grip is a Dual O-Ring, water tight storage compartment capable of storing small parts.  This vert grip is extremely lightweight and utilizes a simple yet durable mounting method for 1913 picatinny rail systems.  Learn More

  39. Daniel Defense Pistol Grip - Daniel Defense Tornado®
    $29.95

    The new Daniel Defense pistol grip is an improvement to the old standby A2.  We designed our grip with ergonomics and controllability in mind.  Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel.  This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves.  Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver.  A soft touch overmolding section enhances grip, wet or dry.

    Learn More
  40. Daniel Defense Pistol Grip - Mil Spec +®
    $29.95

    The new Daniel Defense pistol grip is an improvement to the old standby A2.  We designed our grip with ergonomics and controllability in mind.  Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel.  This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves.  Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver.  A soft touch overmolding section enhances grip, wet or dry.

    Learn More
  41. Daniel Defense Pistol Grip - Black
    $29.95

    The new Daniel Defense pistol grip is an improvement to the old standby A2.  We designed our grip with ergonomics and controllability in mind.  Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel.  This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves.  Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver.  A soft touch overmolding section enhances grip, wet or dry.

    Learn More
  42. Daniel Defense Collapsible Buttstock - Daniel Defense Tornado®
    $69.95

    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.

    Learn More
  43. Daniel Defense Collapsible Buttstock - Mil Spec +®
    $69.95

    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.

    Learn More
  44. Daniel Defense Collapsible Buttstock - Black
    $69.95
    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection. Learn More
  45. Buttstock, Pistol Grip, & Vertical Foregrip Combo - Daniel Defense Tornado®
    $114.95

    BUTTSTOCK

    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.

    Learn More
  46. Buttstock, Pistol Grip, & Vertical Foregrip Combo - Mil Spec +®
    $114.95

    BUTTSTOCK

    The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points.  The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks.  This eliminates the need for a tensioning device or friction lock.  All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm.  The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear.  The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle.  Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.

    Learn More
  47. MK18 Rail Interface System II, RIS II (FDE)
    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense MK18 RIS II is designed to work specifically on the MK18 CQBR! The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need.

    The RIS II MK18 is NOT compatible with an M203.

    The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operator to quickly, and without special tools, mount M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  48. Daniel Defense V5™ S
    $1,769.00

    The Daniel Defense M4, V5 S is a new option within the V5 series, one of the most popular series Daniel Defense has ever produced.  The DDM4V5 S is built around a 14.5” Cold Hammer Forged, Government profile barrel with a smooth shooting and reliable Mid-length gas system.  The barrel is fitted with an extended Daniel Defense Flash Suppressor, which is pinned and welded to reach the NFA required 16” barrel length.  It also carries the lightweight and ergonomic DDM4 Rail 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories.  QD Swivel attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment.  This compact and fast-handling rifle also comes equipped with the rugged and comfortable Daniel Defense Buttstock, Pistol Grip, and Vertical Grip.

    Learn More
  49. Oakley SI Fuel Cell - Mil Spec +®
    $160.00

    Daniel Defense is proud to partner with Oakley in an effort to provide our customers with the most durable and mission critical eyewear protection possible. The SI Fuel Cell is available in Daniel Daniel Mil Spec + and features a small DD logo laser etched into the corner of the lens for a completely custom look. The idea was to create clean, authentic style for those who don’t just walk the path of life – they stomp it and leave footprints. That’s what led to Oakley FUEL CELL®. The idea here is unflinching originality and a smooth look. It’s proof that when authenticity speaks for itself, it speaks with volume.

    Learn More
  50. Oakley SI Det Cord - Daniel Defense Tornado®
    $180.00

    Daniel Defense is proud to partner with Oakley in an effort to provide our customers with the most durable and mission critical eyewear protection possible. The SI Det Cord is available in Daniel Defense Tornado and features a small DD logo laser etched into the corner of the lens for a completely custom look.The SI Ballistic Det Cord is the perfect blend of ballistic protection and Oakley fashion. Fully compliant with the ballistic and optical standards of MIL PRF32432 and ANSI Z87.1 (2010), the SI Ballistic Det Cord is balanced for aggressive environments and covert capabilities. The SI Ballistic Det Cord is also “fully-equipped” with its anti-fog coating, comms compatible ear stems, and rubberized unobtanium nosepiece. It is one piece of eyewear that is ready for any situation.

    Learn More
  51. Oakley SI Gascan - Daniel Defense Tornado®
    $150.00

    Daniel Defense is proud to partner with Oakley in an effort to provide our customers with the most durable and mission critical eyewear protection possible. The SI Gascan is available in Daniel Daniel Defense Tornado and features a small DD logo laser etched into the corner of the lens for a completely custom look. Two lenses are cut from the curve of a single lens shield, then mounted in the frame to maintain the original, continuous contour. Lightweight O Matter frame material offers premium comfort. Peripheral vision is maximized by XYZ Optics, an innovation that maintains visual clarity at all angles of view. Impact protection meets ANSI Z87.1 standards, and our Three-Point Fit retains the lenses in precise optical alignment.

    Learn More
  52. First Choice™ 300BLK Subsonic Ammunition
    $50.00

    Now there’s a 300 AAC Blackout (7.62x35mm) subsonic round truly worthy of the Daniel Defense name. Our DD300BLK ammunition—for target shooting or home defense—is manufactured using only the highest-quality components available, including durable brass cases and precision 220-grain Lapua-Scenar-L OTM bullets, the first choice for serious target competition. Each and every round stamped with “DD” must undergo and pass a thorough inspection to ensure critical dimensions that affect accuracy are met before it leaves our factory. So you can rest assured you’re getting the highest-quality ammunition from a name you can trust. Keep your rifle on target and running smoothly by feeding it the very best ammo. Go with Daniel Defense.  FREE SHIPPING WHEN YOU ORDER 4 OR MORE BOXES.

    Learn More
  53. Daniel Defense 300™ S- Factory SBR
  54. Daniel Defense V11™ SLW (Daniel Defense Tornado®)
    $1,859.00

    The Daniel Defense M4 Carbine V11 SLW is one of the lightest, fastest-handling rifles available in the DDM4 line-up.  Built around a Cold Hammer Forged, 14.5” Lightweight profile barrel, the V11 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16” minimum barrel length.  The Mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts.  A free-floating SLiM Rail 12.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  With the KeyMod attachment at 3, 6, and 9 o’clock and an uninterrupted 1913 Picatinny rail on top, the V11SLW has plenty of room for the sights, optics, and accessories the operator may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.  This rifle is finished in Daniel Defense Tornado Cerakote.

    Learn More
  55. Daniel Defense V11™ SLW (Mil Spec +®)
    $1,859.00

    The Daniel Defense M4 Carbine V11 SLW is one of the lightest, fastest-handling rifles available in the DDM4 line-up.  Built around a Cold Hammer Forged, 14.5” Lightweight profile barrel, the V11 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16” minimum barrel length.  The Mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts.  A free-floating SLiM Rail 12.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  With the KeyMod attachment at 3, 6, and 9 o’clock and an uninterrupted 1913 Picatinny rail on top, the V11SLW has plenty of room for the sights, optics, and accessories the operator may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.  This rifle is finished in Daniel Defense Mil Spec + Cerakote.

    Learn More
  56. Daniel Defense DD5V1
    $2,899.00

     

    The new DD5V1 is a groundbreaking, performance-driven platform engineered from muzzle to buttstock. Incorporating over a decade of expertise from industry-leading Daniel Defense engineers and designers, the DD5V1 establishes a whole new standard in the .308 platform. With innovative features like a 4-bolt connection system utilizing a unique barrel extension, an optimized upper receiver, an improved bolt carrier group, ambidextrous controls, a configurable modular charging handle, and a cold-hammer-forged barrel, the DD5V1—although built around a traditional AR platform— establishes a new tradition in 7.62 rifles. It also features a Geissele SSA two-stage trigger for precise fire control. Even with all of these features, plus a DD Superior Suppression Device and 15” Picatinny top rail, the DD5V1 weighs only 8.3 lbs. The new DD5V1 will be sure to deliver the accuracy, reliability, and durability expected from Daniel Defense.

    Learn More
  57. Daniel Defense V11™ (Kryptek Typhon)
    $1,649.00

    The DDM4 V11 Kryptek Typhon, based on the popular V9 series, was designed for shooters who prefer the benefits of the KeyMod system integrated in the new SLiM RAIL™. KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled. The new SLiM RAIL 15.0 offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. The long, 15” rail gives operators the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets. This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick, but precise rapid fire. An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. The DDM4V11 is equipped with a free-floating, Cold Hammer Forged, 16” Government profile barrel and the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol grip.

    Learn More
  58. Oakley SI Fuel Cell - Ultrablend
    $210.00

    Daniel Defense is proud to partner with Oakley in an effort to provide our customers with the most durable and mission critical eyewear protection possible. The SI Fuel Cell is available in Ultrablend with Polarized lenses that feature a small DD logo laser etched into the corner of the lens for a completely custom look. The idea was to create clean, authentic style for those who don’t just walk the path of life – they stomp it and leave footprints. That’s what led to Oakley FUEL CELL. The idea here is unflinching originality and a smooth look. It’s proof that when authenticity speaks for itself, it speaks with volume.

    Learn More
  59. SLiM Rail® 9.0 (Mid-length)
    $269.00

    The SLiM Rail from Daniel Defense utilizes the KeyMod accessory attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  KeyMod is a recoil resistant, two-part, direct attachment method for accessories that offers outstanding “return-to-zero” when accessories are removed and reinstalled.  The SLiM Rail features the battle-proven “Bolt-Up System” which provides modern flat-top upper receivers with a free-floating, continuous, uninterrupted upper rail platform and allows for simplified alignment to the host weapon upper receiver.  Ambidextrous sling swivel attachment points are integrated into both the left and right side rails at 1 and 11 o’clock. The SLiM Rail 9.0 can be used with a low-profile gas block on pistol, or carbine length gas systems.

    Learn More
  60. Daniel Defense V7®
    $1,599.00

    The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR XS 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR XS 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 6 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip. 

    Learn More
  61. DD Magazine™
    $20.00

    The new DD Magazine is the only one worthy of the Daniel Defense name and is built with the same legendary quality and exacting standards as our world-class firearms. Its 32-round capacity for 5.56mm and 300 Blackout rounds is the most notable enhancement while maintaining the same size as industry-standard 30-round magazines. The DD Magazine surpasses the standard in strength and durability with its lightweight, cutting-edge carbon-fiber-reinforced polymer construction.  An improved feed-lip design and an enhanced anti-tilt follower provide smooth, reliable feeding, while an impact-absorbing baseplate design adds to the magazine’s overall durability. The textured body gives the shooter a firm grip on the magazine while reloading in any situation, with or without gloves. For reliability, durability, ease of maintenance, and legendary Daniel Defense quality, go with the name you can trust. Ask for Daniel Defense.

    Learn More
  62. Daniel Defense Ambush 308 (Kryptec Highlander)
    $2,949.00

    The Daniel Defense Ambush .308 in Kryptek Highlander is the new benchmark for anyone demanding an accurate, fast-handling, hard-hitting platform capable of taking down any North American big-game animal. Built from the ground up, this rifle has been engineered to help you harvest that trophy with the precision and dependability you expect from Daniel Defense.

    Learn More
  63. 18" 5.56, Rifle length, 1:7, MK12
    $349.00

    The Daniel Defense 18” MK12 barrel is constructed from Stainless Steel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible.  These barrels, some of the most accurate and durable barrels available, are bead blasted and chemically passivated to resist corrosion.  The MK12 barrel is engineered with a rifle-length direct impingement gas system.

    Learn More
  64. Daniel Defense DDM4V4®S
    $1,689.00

    The DDM4V4s is Daniel Defense’s latest short-barreled rifle (SBR). Its design is based on an extremely popular configuration that we’ve been providing to law enforcement personnel and agencies as well as civilian users who demand a lightweight, durable, and dependable SBR. Built around a free-floating, Cold Hammer Forged 11.5” barrel, the DDM4V4s delivers optimal maneuverability, reliability, accuracy, and terminal ballistics using a wide variety of ammunition.

    Learn More
  65. Daniel Defense Soft Rifle Case
    $69.00

    The Daniel Defense Soft Rifle Case was designed with the shooter and his equipment in mind.  At 38”x14”, the case is large enough to accommodate up to an 18” barreled AR15/M4 equipped with an optic and 30 round magazine.  The exterior of the case features a clear ID window and a heavy duty Velcro loop patch panel.  Also on the exterior is a separate zipper pouch with individual pockets for storing 3 additional magazines.

    Learn More
  66. Daniel Defense MK18 Pistol (Law Tactical)
    $1,949.00

    The Daniel Defense MK18 pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged barrel, the same length in use for the MK18 upper most commonly used for CQB operations.  This configuration comes standard with a LAW TACTICAL GEN3M folding stock adapter that allows the user to quickly fold or unfold the stock.  The Flat Dark Earth MK18 rail system features the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).

    Learn More
  67. Daniel Defense MK18-Factory SBR (Law Tactical)
    $1,999.00

    The Daniel Defense MK18 features the railed forend currently provided to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  This configuration comes standard with a LAW TACTICAL GEN3M folding stock adapter that allows the user to quickly fold or unfold the stock.  This is ideal for low profile transport and storage.  The MK18 rail system features a patented Bolt-Up System, which has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.  

     NFA DISCLAIMER

    This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.

    Learn More
  68. Daniel Defense ISR (Mil Spec +®)
    $3,049.00

    The Daniel Defense DDM4ISR—optimized for the versatile 300 Blackout cartridge—is now lighter, quieter, and more accurate than ever before. Built around a 9”, Cold Hammer Forged barrel with a pistol-length gas system calibrated for its integral suppressor, this high-performance rifle delivers both subsonic and supersonic projectiles with greatly reduced muzzle blast and flash, helping to conceal a shooter’s location and keep the user on target with faster follow-up shots and less degradation of vision, particularly in low-light situations.

    Learn More
  69. Daniel Defense V7® LW
    $1,599.00

    The Daniel Defense V7 LW is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR XS 15.0 rail. Built around a Cold Hammer Forged, 16” lightweight profile barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR XS 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 6 positions and an uninterrupted 1913 Picatinny rail on top, the V7 LW has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

    Learn More
  70. DDM4 Rail 15.0 (Rifle Length)
    $395.00

    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense. 

    Learn More
  71. DDM4 Rail 9.0 (Mid-Length)
    $365.00

    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense. 

    Learn More
  72. DDM4 Rail 10.0 (Mid-Length)
    $365.00

    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense. 

    Learn More
  73. Daniel Defense Water Bottle, Black

    Regular Price: $29.00

    Special Price $16.00

    Powered by 5.56!  The Daniel Defense DDM4 Water Bottle by Liberty Bottle Works is constructed to the same standards you’ve come to expect from our high quality firearms, rails and accessories.  This 32-ounce, BPA-free (that chemical you don’t want in your body) bottle sports a design suited for the gun enthusiast, and like Daniel Defense, is Made in the U.S.A.

    Learn More
  74. KeyMod 1 O'clock Offset Rail
    $41.00

    The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature optics in the 1 O’clock (right-hand) or 11 O’clock (left-hand) positions for quick, non-magnified, transitions when employing magnified primary optics on rifles with the SLiM Rail™ or any other KeyMod rail system. The geometry allows for zero cheek-weld shift during the transition. This facilitates very fast transitions from magnified to non-magnified optics, and back. The 1 O’clock Offset Rail can also be used to mount a variety of lights or other accessories that mount to a MIL-STD-1913 rail. By flipping the part upside-down, one can mount a light in a good position for use with a vertical foregrip. 

    Learn More
  75. Bipod Mount Adaptor (Rock & Lock®)
    $55.00

    The Daniel Defense Picatinny Bipod Mount Adapter is a lightweight device that allows users with Daniel Defense picatinny rail systems or other MIL-STD- 1913 picatinny rail systems to mount bipods that usually attach to swivel studs.

    Learn More
  76. KeyMod Bipod Adaptor
    $49.00

    The Daniel Defense Bipod Mount Adapter is designed for use on the Daniel Defense SLiM Rail™ and other rail systems which utilize the KeyMod attachment method for mounting accessories.  This lightweight adapter allows users to securely attach bipods with sling swivel stud mounts.

    Learn More
  77. Keymod QD Swivel Attachment Point
    $39.00

    The Daniel Defense KeyMod QD Swivel Attachment Point is designed to allow the operator to mount the popular Heavy Duty Push Button Quick Detach Sling Swivel anywhere along their SLiM Rail™ or other KeyMod rail system. The Daniel Defense Rail Mount QD Swivel Attachment Point has been designed and machined to limit the rotation of the swivel to prevent the operators sling from becoming tangled.

    Learn More
  78. Daniel Defense Rail Panels (Picatinny)
    $26.00

    The Daniel Defense Rail panels are made from Santoprene, which is capable of withstanding temperatures up to 300 degrees, shielding your hand from excess heat while protecting your rail system. They feature Daniel Defense’s signature pattern and provide a rubbery grip surface for a reliable hold in all weather conditions.  Each panel is 7 inches long and can be cut to desired length to work around rail mounted grips and accessories or to fit any picatinny rail system.  Available in Black and include three panels to a package.

    *Fits 1913 (Picatinny) rail systems only - Will not fit KeyMod rail systems*

    Learn More
  79. Daniel Defense V11™ Pro Upper Receiver Group
    $1,279.00

    The DDM4v11 Pro Series Upper Receiver Group was designed for competitors looking for the platform to dominate podiums in today’s popular multi-gun matches.  Built around our newest 18” Strength to Weight, Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the course designer’s most difficult stages.  The new SLiM Rail™ 15.0, which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  Competitors will also appreciate the larger latch provided by a Vltor Gunfighter Mod 4 Charging Handle for easier manipulation under magnified optics.  A newly designed Muzzle Climb Mitigator redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb.

    Learn More
  80. Daniel Defense MK12 Upper Receiver Group
    $1,329.00

    The Daniel Defense MK12 Upper Receiver Group is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible.  This, along with being salt bath nitride finished, equates to unprecedented accuracy and durability.  The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM.  The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated. 

    Learn More
Post your comment

Daniel Defense