Search results for '1 o'clock rail'

Items 1 to 10 of 229 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. KeyMod 1 O'clock Offset Rail

    KeyMod 1 O'clock Offset Rail

    $41.00

    The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature optics in the 1 O’clock (right-hand) or 11 O’clock (left-hand) positions for quick, non-magnified, transitions when employing magnified primary optics on rifles with the SLiM Rail™ or any other KeyMod rail system. The geometry allows for zero cheek-weld shift during the transition. This facilitates very fast transitions from magnified to non-magnified optics, and back. The 1 O’clock Offset Rail can also be used to mount a variety of lights or other accessories that mount to a MIL-STD-1913 rail. By flipping the part upside-down, one can mount a light in a good position for use with a vertical foregrip. 

    Learn More
  2. 1 O'Clock Offset Rail

    1 O'Clock Offset Rail

    $41.00

    Call for Availability

    The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature red dot optics in the 1 O’clock (right-hand) or 11 O’clock (left-hand) positions for quick, non-magnified, transitions when employing magnified primary optics on AR-type rifles with MIL-STD-1913 rails. The geometry allows for zero cheek-weld shift during the transition. This facilitates very fast transitions from magnified to non-magnified optics, and back. The 1 O’clock Offset Rail can also be used to mount a variety of lights or other accessories that mount to a MIL-STD-1913 rail. By flipping the part upside-down, one can mount a light in a good position for use with a vertical foregrip. 

    Updated for 2014, the 1 O’Clock Offset Rail now utilizes our patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.

    Learn More
  3. Daniel Defense M4 URG, v7 Lightweight

    Daniel Defense M4 URG, v7 Lightweight

    $949.00

    The Daniel Defense M4, V7 Lightweight Upper Receiver Group is built off the extremely popular V5 platform and is approximately five ounces lighter than the original V7. We incorporated the Modular Float Rail 12.0 to provide each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the installation of modular picatinny rail sections is accomplished with little effort. This allows the shooter to customize the rail set up.  The DDM4v7 Lightweight URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  4. Wrench, Omega X/Modular Float Rail

    Wrench, Omega X/Modular Float Rail

    $11.00

    The Daniel Defense  Omega X / Modular Float Rail Barrel Nut Wrench is a proprietary 2 prong spanner wrench required for the installation and removal of current production Omega X and MFR Barrel Nuts.  It is designed to be used in conjunction with a 1/2" Drive Torque Wrench.

    Learn More
  5. Daniel Defense M4 URG, V9 S2W

    Daniel Defense M4 URG, V9 S2W

    $1,079.00

    The new Daniel Defense DDM4v9 Strength to Weight Upper Receiver Group was designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  Equipped with a heavy 18” S2W profile Cold Hammer Forged barrel covered by the DDM4 Rail™ 15.0 gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when swinging between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.

    The v9 S2W URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the salt bath nitride treated barrel assembly.  Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  6. Vertical Foregrip, Foliage Green

    Vertical Foregrip, Foliage Green

    $9.99

    When utilizing the vertical grip, the user has more positive control over the rifle enabling him to easily maneuver through close quarter environments. This Vertical Grip is designed with the shooter in mind. The body of the Vertical Grip is extremely robust and textured for a full positive grip. The attachment method was engineered to eliminate any movement when installed. The waterproof inner core of the grip is ideal for storing spare batteries and will accommodate one AAA or AA battery, or two CR-123 batteries.

    Learn More
  7. Daniel Defense M4 URG, V9 LW

    Daniel Defense M4 URG, V9 LW

    $1,079.00

    The new Daniel Defense DDM4v9 Lightweight Upper Receiver Group is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  The long, 15” DDM4 quad rail over a 16” cold hammer forged Lightweight profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.

    The V9 Lightweight URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  8. Daniel Defense M4 URG, V9

    Daniel Defense M4 URG, V9

    $1,079.00

    The new Daniel Defense DDM4v9 Upper Receiver Group is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications.  The long, 15” DDM4 quad rail over a 16” cold hammer forged Government profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets.  This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire.  The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.

    The V9 URG is equipped with a single pinned low profile gas block that is drilled, taper reamed, and press fit into place to securely attach the low profile gas block to the barrel assembly. Daniel Defense complete upper receiver groups come complete with bolt carrier group and charging handle.

    Learn More
  9. SOCOM MK18 Upper Receiver Group (w/Sights)

    SOCOM MK18 Upper Receiver Group (w/Sights)

    $1,499.00

    Call for Availability

    Developed to meet the standards of USSOCOM, the Daniel Defense SOCOM MK18 URG features a 10.3" Cold Hammer Forged Barrel, the Daniel Defense RIS II MK18 Rail System, a MK12 Low Profile Gas Block, a Daniel Defense Flash Suppressor, and Daniel Defense rail mounted sights.

    Learn More
  10. SOCOM M4A1 Upper Receiver Group (w/Sights)

    SOCOM M4A1 Upper Receiver Group (w/Sights)

    $1,519.00

    Call for Availability

    Developed to meet the standards of USSOCOM, the Daniel Defense SOCOM M4A1 URG features a 14.5" Cold Hammer Forged Barrel, the Daniel Defense M4A1 RIS II Rail System, a MK12 Low Profile Gas Block, a Daniel Defense Flash Suppressor, and Daniel Defense rail mounted sights.

    Learn More

Items 1 to 10 of 229 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction