Search results for '1 o'clock rail'

Items 1 to 10 of 38 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  1. MK18 Rail Interface System II, RIS II

    MK18 Rail Interface System II, RIS II

    $445.00
    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense MK18 RIS II is designed to work specifically on the MK18 CQBR! The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need.

    Learn More
  2. M4A1 Rail Interface System (RIS) II

    M4A1 Rail Interface System (RIS) II

    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block.
    The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operator to quickly, and without special tools, mount M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  3. Wrench, 7.62 Lite Rail Barrel Nut

    Wrench, 7.62 Lite Rail Barrel Nut

    $11.00

    The 7.62 Lite Rail™ Barrel Nut Wrench is a proprietary spanner wrench used to install our 7.62 Lite Rail™ system.

    Learn More
  4. M4A1 FSP Rail Interface System (RIS) II

    M4A1 FSP Rail Interface System (RIS) II

    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II M4A1 FSP feature a cut-out in the top rail to accommodate a standard front sight base on a carbine-length gas system.

    NSN # 1005-01-566-5280

    Learn More
  5. Fixed Front/Rear Sight  Combo

    Fixed Front/Rear Sight Combo

    $125.00

    Machined from 6061-T6 Aluminum and Military Specification Hard Anodized, our Fixed Front/Rear Sight combo is both lightweight and durable and is the perfect complement to each other.

    Learn More
  6. Rail Ladders

    Rail Ladders

    $26.00

    Daniel Defense low profile rail ladders are made from Santoprene which can handle heat up to 300° F. The ladders provide a rubbery grip surface while protecting your rail system. They are easily shortened by cutting to length and fit onto any picatinny rail configuration.

    Learn More
  7. 18" 5.56mm S2W® Mid-length CHF Barrel - w/LPGB

    18" 5.56mm S2W® Mid-length CHF Barrel - w/LPGB

    $349.00

    The Daniel Defense 18” 5.56mm NATO S2W® barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel) and a Mid-length gas system.

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  8. Lower Receiver Parts Kit, Semi Auto

    Lower Receiver Parts Kit, Semi Auto

    $99.00

    We are proud to offer this kit for those interested in assembling their own AR15. Although there are many manufacturers of so-called MIL-SPEC parts, we have gone to great lengths to insure the parts we provide are of the highest quality and compatible with a wide assortment of available receivers. However as we have developed this kit we have seen a wide variety of lower receivers; some from “manufacturers” of questionable quality. Consequently some of our parts may not fit properly in some of these receivers. We at Daniel Defense always recommend purchasing the highest quality parts available to assemble your AR15. But if your receiver is not compatible with our parts for any reason we will gladly accept your return for a full refund.

    Learn More
  9. 16" 5.56mm Mid-length, 1:7, S2W Profile

    16" 5.56mm Mid-length, 1:7, S2W Profile

    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  10. 18" 5.56MM S2W Rifle Length CHF Barrel

    18" 5.56MM S2W Rifle Length CHF Barrel

    $289.00

    The Daniel Defense 18” 5.56mm NATO S2W® barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel) and a Rifle Length gas system.

    Learn More

Items 1 to 10 of 38 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction