• Home
  • Firearms
    • 7.62 x 51mm
    • Pistol Length Gas System
    • Carbine Length
    • Mid Length
    • Rifle Length
    • Ambush Hunting Rifles
  • Uppers
    • Pistol Length URG
    • Carbine Length URG
    • Mid Length URG
    • Rifle Length
  • Rails
    • DDM4 Rail
    • Omega Rail
    • Rail Interface System (RIS) II
    • SLiM Rail
    • Rail Tools & Components
  • CHF Barrels
    • 10.3 Inch CHF Barrels
    • 11.5 Inch CHF Barrels
    • 12.5 Inch CHF Barrels
    • 14.5 Inch CHF Barrels
    • 16 Inch CHF Barrels
    • 18 Inch CHF Barrels
  • Ammunition
  • Parts & Accessories
    • Gas Blocks
    • Lower Parts
    • Magazines
    • Muzzle Devices
    • Rail Ladders
    • Tools
    • Small Parts
    • Sights
    • Upper Parts
    • Vertical Grips
  • Mounts
    • Sling
    • Optics
    • Flashlight
    • Bipod
  • Gear
    • Nine Line Apparel
    • Oakley
    • Knife
    • Apparel
    • Promotional
    • Water Bottles
    • Rifle Case
  • Furniture
    • Buttstocks
    • Pistol Grips
    • Vertical Grips

Search results for 'barrel'

Refine Results:
  1. M4A1 FSP Rail Interface System (RIS) II
    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II M4A1 FSP feature a cut-out in the top rail to accommodate a standard front sight base on a carbine-length gas system.

    NSN # 1005-01-566-5280

    Learn More
  2. Wrench, 7.62 Lite Rail Barrel Nut
    $11.00

    The 7.62 Lite Rail™ Barrel Nut Wrench is a proprietary spanner wrench used to install our 7.62 Lite Rail™ system.

    Learn More
  3. 10.3" 5.56mm, Carbine, 1:7, GOV
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  4. 11.5" 5.56mm, Carbine, 1:7, GOV
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  5. 12.5" 5.56mm, Carbine, 1:7, GOV
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  6. 14.5" 5.56mm, Carbine, 1:7, M4
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  7. 14.5" 5.56mm, Carbine, 1:7, LW
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  8. 14.5" 5.56mm, Mid-Length, 1:7, LW
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  9. 14.5" 5.56mm, Mid-length, 1:7, GOV
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  10. 16" 5.56mm, Carbine, 1:7, M4
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  11. 16" 5.56mm, Carbine, 1:7, LW
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  12. 16" 5.56mm, Mid-Length, 1:7, GOV
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  13. 16" 5.56mm, Mid-Length, 1:7, LW
    $289.00

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  14. MK18 Rail Interface System II, RIS II
    $445.00
    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!

    The Daniel Defense MK18 RIS II is designed to work specifically on the MK18 CQBR! The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need.

    Learn More
  15. TEK-BBK-10-10.3" Bolt and Barrel Kit
    $599.00

    The Daniel Defense Bolt and Barrel Kit has been designed to provide the unit level armorer with all the parts needed to maintain an upper receiver group.

    Learn More
  16. TEK-BBK-14-14.5" Bolt and Barrel Kit
    $599.00

    The Daniel Defense Bolt and Barrel Kit has been designed to provide the unit level armorer with all of the parts needed to maintain an upper receiver group.

    Learn More
  17. M4A1 Rail Interface System (RIS) II
    $445.00

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command!
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block.
    The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operator to quickly, and without special tools, mount M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  18. 16" 5.56mm, Mid-length, 1:7, S2W®
    $289.00

    The Daniel Defense 16” 5.56mm S2W® barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel), a 1:7" twist rate, and a Mid-length gas system.

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  19. 18" 5.56mm, Rifle Length, 1:7, S2W®
    $289.00

    The Daniel Defense 18” 5.56mm NATO S2W® barrel is designed with a strength to weight profile (Daniel Defense's Heavy Barrel) and a Rifle-Length gas system.

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  20. 18" 5.56mm, Mid-length, 1:7, S2W®
    $289.00

    The Daniel Defense 18” 5.56mm NATO S2W® barrel is designed with a heavy strength to weight profile and a Mid-length gas system.

    Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

    Learn More
  21. 18" 5.56, Rifle length, 1:7, MK12
    $349.00

    The Daniel Defense 18” MK12 barrel is constructed from Stainless Steel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible.  These barrels, some of the most accurate and durable barrels available, are bead blasted and chemically passivated to resist corrosion.  The MK12 barrel is engineered with a rifle-length direct impingement gas system.

    Learn More
Post your comment

Daniel Defense